Ultimate Party Pants // Jacquard Jenny Trousers

Posted on by

1

Jenny Trousers

Nothing like the freshness of spring to share my recent winter project!

Have you ever had fabric you’ve held onto for so long, just waiting for the right project that it almost begins to feel *too* special? Like, if a project wasn’t good enough to make with it thus far, what could possibly live up to its standards now?! This is basically the story of this lovely jacquard fabric from Blackbird that’s been sitting in my stash since 2018 (I had to go rooting though my emails to find out exactly when I had gotten it. 🙈)

When I first purchased it, I figured I would make some sort of fancy dress. Something vintage feeling, perhaps a fit and flare or wiggle dress. However, the occasion to prompt some deadline-induced sewing never really arrived and so it sat on the shelf, looking oh so lovely for oh so long.

IMG_1094

This holiday season, however, struck me in a crafty mood, and some small gatherings with friends provided some deadlines and I decided the time was now. I was about to proceed with the dress plan and was scouring patterns when Rory asked “Ooh, but what if it was pants?”

But…what IF it were pants?

Cue the lightbulb moment and off I went to Pinterest for inspiration. I really liked the idea of something with a wider leg but not overly full since this fabric has a pretty stiff drape and is too thick for things like pleats. After a bit of searching I landed on the Closet Core Jenny Trousers for the perfect high waist factor and overall silhouette.

IMG_0988

In a move most unlike me, I made a practice toile with some leftover denim (that I am going to turn into shorts this summer) to ensure sizing in the rise and check the waistband measurement. I also decided here that I wanted to add some welt pockets to the back (the patch pockets in the pattern felt too casual) and played with placement and used some scraps to practice the technique.

I had made welt pockets in the past and had a vague recollection of how to do it but I was still pretty nervous- what if I wreck this beautiful fabric I have been holding onto for nearly 7 years?! But after making a practice one, all fears went away. Y’all – welt pockets are easy! Okay, if not *easy*, they aren’t scary, nor technically challenging. It just takes following the steps and some care and it’s magic. Instant polish.

Jenny Trousers

My one foible did end up being in the pocket placement. Because they weren’t in the pattern originally I sort of had to guess where they would be best. I originally marked it at end of the dart, but on the toile it felt quite low, so I raised it up so it sat about 3″ below the waistband. In my usual indecisive haze, scouring the internet, asking sewing friends, and perusing the internet for concrete answers (there are none),  I measured another pair of RTW pants I have with welt pockets, and those started only 2″ from the waistband and I made a last minute pivot. Sadly I feel like they are a smidge too high on the back. Its a little uncomfortable to reach back to use the pocket, and that original extra inch lower would have been perfect. Thankfully, with the busyness of the pattern and the relative size of the pockets, it isn’t really that noticeable at most glances, especially the statement the pants make as a whole. It by no means *ruined* the pants, and just goes to show that the world doesn’t end if you make a mistake, even in the good fabric.

Jenny Trousers

I added  3″ to the inseam length so I could wear these babies with heels and it feels so fun to be so TALL. Later on I also blind hemmed the extra length it up for another event to wear with flats, and I took it out again for the photos. If I need, I can re-hem them again. So versatile!

I just have to say, I LOVE THESE PANTS SO MUCH. They are a classy statement piece, but they are also so comfy. They are an instant party and are so fun to have in my wardrobe. I can definitely see these making a regular appearance at holiday events. So happy I contemplated the notion of “what if pants?”

Get The Most Out of Your Fabric // Tips for Efficient Cutting

Posted on by

0

Nothing drives me crazier than a pile of almost-but-not-quite usable scraps. Too big to feel comfortable throwing away but too small to get anything out of it. As I have started buying higher quality fabrics (read: more expensive) I want to get the most out of it as possible. Over the years, I began playing with new ways of cutting out my pattern pieces to save on yardage and have almost always been able to get away with buying less than the recommended amount. As you may have seen in my last two posts, in my most impressive feat, I managed to squeak two garments from only 1.5 m of fabric!

Now, as a disclaimer, I do have to mention that size is a factor here. By being on the smaller end of the size range, there are lots of things I can do with the pre-determined width that fabric comes in (usually around 150 cm) that wouldn’t be possible in all sizes. However, there are still a bunch of tips in here that can generally help in reducing fabric waste and leave you with the most usable off cuts.

Disclaimer number two: You’ve gotta know the rules before you can break ’em! There are very good and important reasons for cutting diagrams, fabric yardages and requirements. Simply ignoring all these things can result in a wonky, twisting, uneven and ill-fitting garment. However, once you have a good understanding of grain, stretch, and construction, you will have a better idea when it’s imperative you do things precisely, and when things can get a little loosey goosey.

The goal of these cutting tips is about maintaining the most available surface area in the off cuttings from your fabric. The larger pieces you can leave yourself at the end of the project, the more likely you’ll be able to use those pieces for something else. If you’re lucky you could get another small garment like a tank top out of it, but even having enough to be able to use it for fun pockets, cuffs, facings or other details is awesome. It’s also very helpful if you bought a fabric on a whim without a project in mind and when you do settle on something, you find it’s not quiiiite enough as the pattern recommends (or, like me, you are torn between two patterns and just decide to make both!).

Generally, to assess if I can make this work, as a first step I will roughly place all the pieces on my fabric to determine if there is enough physical fabric surface area to accommodate the pieces. If so, then let the Tetris begin!

The first tip is one that can be applied to every type of project and that is to cut your pieces out in a single layer, rather than on the fold. This allows you to get everything puzzle-pieced in as closely as possible. However, if you don’t have a large enough space to have the full yardage laid out, (or if you want to be more time efficient) you can still cut things on the fold, just a little more deliberately. Instead of folding all the fabric directly in half, fold over just the width of the pattern piece. This prevents all those random Rorschach shaped pieces leftover in the middle. Usually I will go for more of the ‘average’ width of my pieces but in the case of these sweaters, I did it one piece at a time to get the most efficient space use. This keeps all the funny shaped edges on one side of your fabric and a clean, wide-open yardage on the other.

Also, just a general note, but you can put pattern pieces right next to each other. Like, literally touching one another. A lot of pattern diagrams have everything evenly spaced out. There is absolutely no need for this- pattern pieces aren’t cookies that need to spread out! Keep an eye on your grainline and get everything all snuggled up together!

If your fabric is solid or has a non-directional print, you can flip pieces upside down to get things closer together. This works especially well for flared pieces like skirts where the triangles just fit right together.

And now for the more “creative” tips when you have to be especially economical with your fabric.

Depending on the fabric and the garment you can ask yourself; are there some pieces that can be rotated 90 degrees? I find that often I don’t have enough for something like a waistband width-wise, but I usually have a strip on the side I can fit it onto. Or pockets, or cuffs. These little non-structural pieces can usually be a little off grain without ruining the integrity of the garment. It also is great for pieces that are going to be reinforced with interfacings later anyway.

If you have lots of pieces that need to be cut on the fold that demands so much fabric length, you can also ask  – is there somewhere in the garment that can get away with a sneaky extra seam? I will often add a center back seam on dresses that were meant for the fold simply because I can cut the pieces separately from elsewhere in the yardage. Just make sure to add in some seam allowance, and honestly you can barely ever notice. On this particular project, I was down to limited options for the funnel neck of the Coco sweater. There was one piece that could have been cut on the fold but it would have reduced the height of the collar. The other option was to have the full height, but it would end up with two seams at the shoulders rather than one seam at the back. You can’t even tell!

And when push comes to shove and you really are short on fabric… can the pattern pieces be altered a little? Can the waistband be narrower or hem be shorter? For the Marlo sweater, I wanted contrast cuffs and trim (but also needed it since I used every inch of the floral), and my scraps of the ivory knit were pretty thin, so I just reduced the width of the collar and waist trim.

I hope some of these tips have inspired you to think a little creatively about how you cut out your patterns and how to get the most out of your fabric. Do you have any other pattern hacks you use to save fabric? I would love to hear them!

Flower Power Pt. 2 // True Bias Marlo Sweater

Posted on by

2

IMG_8489

Hello and welcome back! This is the second of our adventures with this daisy jacquard knit fabric. In case you missed it, I bought 1.5 meters of this fabric and couldn’t decide between two patterns to make from it, so I got creative and managed to squeeze two cropped sweaters out of it. The first was a retro Coco Sweater and the second is this relaxed True Bias Marlo cardigan.

I knew this pattern would be a great fit for this whimsical print. I loved the look of  the relaxed, slouchy fit, and together feels like a cool grandma’s sweater.

IMG_8546

In my deliberations, I really considered making the full sized version for the ultimate laid back comfort, but I to get the most of my fabric it would have to be the cropped version. Thankfully I found the perfect coordinating solid knit fabric for the cuffs and neckband in the back of my stash (leftovers from my Zadie Dress) . This ended up being the perfect find, as it is slightly thinner and folded over nicely. I think if I used the self fabric it would have felt too bulky.

IMG_8587

I cut a size 4 and made only a few adjustments. Normally, even with a cropped sweater, I would add a little bit of length to the torso but because I was playing fabric chicken, I didn’t have the real estate to do so, but I did have enough room to add an extra 2cm to the sleeve length (#longsleeves4eva).

I also adjusted the placement of the button closures. I felt that the original placement made the neckline closing too high, and I liked the idea of having it feel a little more open even when buttoned up. I played around with the placement by just pinning it as I wore it. The softness of the binding allowed me to be more flexible here as the neckline curved however I needed it to.

IMG_9021

Speaking of buttons, I found three perfect buttons from my collection that complimented things well. I am always wary of buttonholes, since it feels like everything can go wrong here. So I diligently practiced on some scrap fabric. No issues. And then it was time for the real thing aaannd my bobbin got tangled. Luckily that was the only snafu and it didn’t damage my fabric too badly when unpicking it. No matter how many times you practice those buttonholes are always out to get you…

IMG_8651

The final garment is adorable, on trend and so cozy. I do find this a bit challenging to style as I don’t have anything else quite like it in my wardrobe, but it’s been a fun challenge to experiment mixing it in. Especially since it’s just so darn comfortable. I think adding that extra length would have helped if possible. While I truly believe that you should wear whatever you want at whatever age you are, I personally don’t like showing off midriff so there are some limits to what I can pair this with at this length.

I hope your spring has been sunny and I will be back soon with an in-depth post about how I managed to squeeze both patterns from my limited fabric yardage. 

Flower Power Pt. 1 // Tilly and the Buttons Coco Top

Posted on by

2

IMG_8411

Well hello there friends! It’s been a while. Spring has come in roaring and ready this year, basically kicking off with a few weeks of summer-like weather before settling back into its normal routine. Flowers are steadily popping up from the ground and I am finally getting around to sharing some cute floral numbers I sewed up literally about a year ago. (Better late than never!).

The story begins with this irresistible daisy jacquard knit from Blackbird Fabrics. It was selling like hot-cakes and I snuck in my order with the last 1m they had left. I sent an email to see if there was a little bit extra at the end of the roll and thankfully I was able to snag an extra half meter! Woohoo. Now the question was, what would I actually do with it? See, I had no plans when I asked for more…just regular old fabric stash hoarding.

It’s a light, summery print, but the knit is quite warm and squishy so I needed a pattern that would work for all seasons. I eventually narrowed down to either the True Bias Marlo sweater or a Tilly and the Buttons Coco sweater. Both would be so perfect but I couldn’t choose and I didn’t have enough to sew two sweaters…or did I?

IMG_9019

I started getting creative with my pattern pieces and noticed that if I made *cropped* versions of both patterns, I could juuuuust squeeze both onto this yardage. I could have my cake and eat it too! I am planning to write a larger post soon about how I actually managed to pull off this fabric wizardry but for now, sweater number one: The Coco Top.

The Coco pattern already has such a retro 60s vibe with the wide roll neck, so making a cropped version feels like a natural fit. I cut a size 3 of the pattern and naturally had to make a few adjustments. I chose to crop the length at the waist  ‘lengthen/shorten’ line and then added 1 inch for a wide hem. I also eased the curve into the waist and made it fall more straight down from the bust.

IMG_8383

As per my usual tall-gal adjustment, I added 2 cm to sleeve length, but after sewing it up and trying it on I realized the sleeves were still a wee bit too short for my preferences. (It was totally wearable but I like my sleeves to basically cover my whole hands, especially in snuggly fabric.) To combat this I went back into my off cuttings and was able to cut out two rectangles and added little cuffs to the ends of the sleeve. It makes the top a little more casual feeling but it also feels pretty natural on such a plushy knit.

In my creative pattern finagling, I couldn’t cut the neck piece on the fold (which would have one center back seamline), and so I had to cut it in two and have two seams. I aligned them at the shoulders and you can’t really tell. One thing I didn’t consider was the thickness of the fabric affecting the rolling over of the neckline. I didn’t have much fabric room to play with, but in the future if I were making this pattern in a thicker knit, I would make it a little taller so it would fully roll over properly. Again, not a big deal and it doesn’t change the overall outcome, but its one of those small details.

IMG_8347

As for construction, it zipped up super quickly in an afternoon, just using the overlocker and ta da! It’s been pretty fun playing with ways to style the sweater. I had assumed it would be more of a spring/fall garment but I found myself digging it out over the winter and wearing with wool skirts for a serious retro look.

Stay tuned for part two with the Marlo Sweater!

Ultimate Winter Coziness // Named Talvikki Sweater

Posted on by

2

featuring the named patterns talvikki sweater

Hurray! It’s the first make of 2022! In fact, its’ my first (garment) make in nearly a year now. A lot of that had to do with moving to a new space. If any of you have moved recently, you know how much of a disruption it can be to your sewjo. It’s not just getting it unpacked, but also organized and inviting, making it easy to feel inspired to get going on a project. It’s been a while putting this room together and there’s still so much to do, but I’ve gotten to a point where I am feeling creatively excited and have the space to make some fun things happen. On to the sweater!

The pattern is the Named Talvikki Sweater, a much loved pattern in the community for its classic silhouette, developed in a really fashion-forward way. I’ve had it in my stash for years but found myself struggling to find the ideal fabric for it. I wanted something that had some texture or color variation, (worried that a solid, smooth color would feel too bland on such a high-coverage sweater) but not a print. I wanted something snuggly to play with the oversized vibe, but structured enough to hold the shape of the neckline. It also needed a decent amount of stretch too, to get it over your head. Quite the tricksy combination. For the last few years, as the winter seasons approached, I kept my eye out for the seasonal fabric launches. Luckily this year Blackbird Fabrics had just the ticket: a lovely boiled wool in a light, heathery grey.

Kat peeks out from behind the high neckline of the sweater

I bet the first question you have is… is it itchy? If you are super sensitive to the feeling of wool, you may find it a tad rough. I can be picky with wool sometimes, but because this fabric isn’t particularly ‘fuzzy’ (which is what bothers me), I find it comfortable. It has a pleasant squish and it feels like pure cozy. But just in case, I did take a few steps to mitigate any potential irritation, and I’ll get back to that in a moment.

I cut a size 4/6, and I did my usual length-adding adjustments. With each new pattern I will start by holding up the pattern pieces to my body and deciding how much I need to add, since it can vary depending on the style. I decided to add just 1 cm to the waist length and about 3cm to the sleeves. I think the proportions are perfect, especially the sleeves. In a softer fabric I may consider increasing the waist length a bit more since it may feel a little short with the fabric drape at the front (notes for future self).

Kat poses to the side to show the side split and high-low hem

Because the boiled wool is so structured I opted out of adding interfacing to the neckline, knowing it could hold its own. In fact, I was worried that even just a facing of the same fabric would be *too* structured. This was also where I was most worried that the fabric might be irritating on my neck. So the two-in-one solution? Cut the facing from a soft ponte knit. It had a smooth feeling for the inside of the sweater, reduced bulk and there’s still plenty of structure. The ponte facing was sewn with under-stitching to give it a fighting chance against the wool pulling it to the outside and I vigorously tacked it down to the shoulder seams and darts as well for good measure.

Kat rolls up sweater sleeves to reveal contrast lining

When I was cutting out the facing piece from my ponte, I also had the idea to add some sleeve facings. At first for comfort, but also as a nice contrast if I decide to roll the sleeves up a little. To cut them out, I traced the sleeve pattern piece from where the fold-up hemline was marked to about 10cm up the sleeve.

Flat lays of the sleeves and sleeve facings being attached

To make the cuffs, I sewed the bottom of the sleeves to the facing right sides together, turned up the hem allowance, pressed and under-stitched. Here, I decided to topstitch the facing down before sewing the sleeves. I could have sewn the side seams starting from the cuff up the sleeve then rolled it inside and topstitched. This would have given a ‘cleaner’ finish on the inside of the garment, but I was concerned that having that ‘double’ seam on the inside would be bulky and wobbly. By doing the side seam after, you can see the overlocked seam on the inside cuff when I roll up the sleeves, but all 4 layers of fabric are overlocked together which feels smoother.

before and after demonstration of strengthening the seamlines

Speaking of the fabric thickness, I did need to make a few construction accommodations. I adjusted my stitch length on my machine to 2.8 to keep things running smoothly. The instructions call for a lot of the assembly to be done with the overlocker, which I love and did, but because the fabric is so bulky, the stitch threads were looser to accommodate that and looked ‘pulled apart’ on the right side. Structurally, the seams were fine, but I did opt to run some of the higher stress seams (shoulders, armholes) through my regular sewing machine to get them real snug so there were no snags or mishaps in the future. 

I sewed this sweater during a -30 degree cold snap as the perfect solution to the chill and 2 days after it warmed right up to 0. Naturally. It made it nicer for photos but I have to wait until our Canadian winter gets back into gear before I can really enjoy the full cozy majesty of the wool.

After waiting so long to make it, I can say I am so happy with this pattern. It’s a dream. The shape of the neckline with the cool darts just feels so chic for a pullover. Its the perfect ‘elevated casual’ I aspire to. Upon reflecting on my me-made wardrobe a while ago I noted that I don’t really wear as many makes in the winter because I just wanna live the snug life in sweaters and pants instead of the dresses and skirts that usually come off my machine. This is a perfect winter addition to my wardrobe that feels classic but also casual enough for lounging around. My only hope is that it doesn’t take nearly as long to find ideal fabric if I want to make another in the future.

Spooky Sewing // Halloween Boo-nting

Posted on by

0

Halloween Bunting // Boots and Cats

Happy October everyone! Hope the autumn season and approaching Halloween festivities are making you feel nice and cozy. 

If you know me, you know that I LOVE Halloween. Something about the warm autumn vibes mixed with the cool creepiness of an oncoming winter, plus the creativity and the CANDY that comes with it all just gets me. Don’t come at me with scary things though. I get nightmares. I’m all about the cute here.

Halloween Bunting // Boots and Cats

One area of cute I love to drool over is the array of adorable halloweenie fabric prints that come out each year. I am not a quilter, so I have little use for these seasonal printed cottons. I love looking at the quirky, funny, delightful little ghosts, pumpkins, and black cats that adorn these sweet prints and it makes me sad to not have a reason to acquire them and hoard them like dragon on a pile of gold make things with them. 

Until now.

This past year we moved into a new place, which meant that as October approached, I had an array of new areas to consider decorating. I was struck by a simple idea to fill some space with some Halloween fun, but also mostly as an excuse to buy printed fabrics: a festive bunting!

Halloween Bunting // Boots and Cats

I purchased my fabric from Rick Rack Textiles (they have the BEST prints) and chose a few assortments that complemented each other, to be softened by some neutrals/ solids from my scraps bins. I didn’t really follow a tutorial for this, I mostly followed my gut.

I made a cardboard template of the triangle that was 16 cm wide at the base and 18 cm tall and used it to cut my fabric out with a rotary cutter. I cut from folded fabric to get a front and back of each triangle. The all-over prints were really fabric efficient since I could just flip the template upside down and cut another piece using the shared edges, whereas the one-directional prints ate up a lot more fabric. Luckily for this project, you don’t actually need much fabric at all, but I am so conscious of scraps and waste (especially after moving boxes of small offcuts haha).

Halloween Bunting // Boots and Cats

From there I sewed the triangles on the sides with a 0.75cm seam allowance and left the top open so I could flip them inside out. I trimmed off the seam allowance at the bottom point and the bit that popped out the top and pressed them flat. I arranged the prints in a pattern that felt balanced then pinned them sandwiched inside some double fold bias tape. All it took from here was to run the whole thing through the machine with my edge-stitch foot, sewing close to the front edge of the bias tape, capturing all those raw edges inside. And boom! We got a festive bunting.

Halloween Bunting // Boots and Cats

Halloween Bunting // Boots and Cats

I hung one of them up in my new sewing space (it matches my *very* grown-up window clings) and will find a space for the more neutral prints somewhere else in our home. This was a fun and easy make to kick off the new sewing space and the spooky season. Hope you are all having fun with your seasonal crafting! Boo!

Who do you dress for? // Clothing as performance

Posted on by

1

Clothing as Performance // Boots & Cats

About 8 years ago I was working at a clothing store that specialized in modern retro and rockabilly styles. Think 50s circle skirts with fluffy crinolines, brightly coloured 60s wiggle dresses, and polka dot everything. I’d always had a soft spot for mid-century fashion, particularly the glamour of Audrey Hepburn and the sophistication of the editorial photography of John French, but had never previously adopted the clothing into my daily life. As I worked there, surrounded by beautiful dresses and co-workers who lived the look, I started to dip my toes into the style myself. I became obsessed with acquiring new pieces, both new and vintage. Wearing a crinoline became something that happened on a semi-regular basis rather than just at a costume party and I learned more than one hair roller set. But as I did so, it became increasingly clear that there were places where I was excited to go full on Pleasantville and other times where I couldn’t imagine leaving the house in anything but a basic tee shirt and jeans.

This internal debate made me feel like a poser. If I didn’t feel like I could wear the retro look in all aspects of my life, then I mustn’t *really* be into it, right?

Clothing as Performance // Boots & Cats

One late summer weekend that year, I had a family barbecue approaching and I was torn between wearing a new brightly patterned fit and flare dress, or denim shorts and a tee. On one hand, I wanted to wear the dress, because it was a) fabulous, and b) It was the perfect weather to wear it before it got cold. But on the other hand, I had a feeling that it might welcome comments, perhaps like “wow, where are YOU off to?” or “someone’s fancy tonight!”, and figured it might be easier to catch up with my relatives without that getting in the way. Maybe it would be easier to connect if I could just blend in with the crowd?

As we are wont to do in this day and age, I took the question to social media: “Would you wear clothing considered more “out there” to a family function if it might mean it becomes harder to connect with people?”

Naturally, and as I expected, all the answers were something along the lines of “Of course! You do you and don’t care what anyone else thinks!” “Dress how you want to!” “Don’t let the haters bring your style down!”.

Which, to all those people, I completely get and support! We should be able to embrace what we love and express ourselves visually the way and not feel pressured to suppress ourselves for the comfort of what others deem appropriate.

But.

It also got me thinking about how we use clothing as a communication tool. We all know about dressing for the situation as is applies to your environment; you dress nicer for the office that you do for a Saturday on your couch, you wear sneakers for running and old jeans for painting, but what about your social environment? How does it change depending on which crowd you’re with?

Katryna-5493

For me, it really boiled down to who I was expressing myself to. I use my clothing often to speak for me. I will dress down to create ease around other people, to blend in so we can just relax and play lawn games. I’d pull out my funkiest pieces for an event catch the attention of people I admire to invite small talk to break the ice (“oh I love that skirt!”). Sometimes I’d dress a little extra to stand out as an authority in a situation that other people can look to as a host.  But mostly, it’s communicating something about myself that I might be too shy to say outright (“I’m fun and creative! Trust me! Look at the crazy patterns I’m wearing!”)

I started thinking about this again as we all went into isolation last year. Until I began taking photos for Me Made May, I stopped coloring my hair. A part of me felt like using my somewhat-expensive purple color conditioners would be a waste. Why would I style my hair if no one would see it? It wasn’t until I was regularly taking and sharing photos that I started to wear more than the 3 outfits (sweatpants) I had on rotation. I started to play with my expression but even I had to admit it was completely for the presentation of other people. And I know this because as soon as the month ended, the 3 sweatpants ensemble reigned supreme as of June 1.

Why could I not feel that I owed myself purple hair and fun dresses? There are parts of my wondering that soars straight down the patriarchal-beauty-standards rabbit hole. To go really deep on the topic I recommend this Jessica DeFino article (I have fallen in love with her writing over the past year). But on a lighter level, how does this affect my sewing practice and personal presentation?

Katryna-5609

As sewists, we create to have control over our self-image. Either by making fantastical things no one could ever buy, or just preferring to have more say in what colours, fibre types or fit we prefer our clothes to have. Yes, it is a hobby that takes skill, precision and creative thinking, but we WEAR the output of that endeavor. Over the years I have found that I don’t wear the clothes I make or feel as comfortable in them as something I picked up at the mall (or more recently, Poshmark) in most situations. Not because they aren’t made right or fit poorly (okay, in my case it is sometimes the fit, but I’m workin’ on it), but because the clothes I make are usually the most distilled version of myself in my head. She’s glamourous, artsy, fun and cool. She takes risks and wears weird clothes! But in a word designed to make us feel self-conscious most of the time, I rarely actually feel like that person. Is it disingenuous to express what I don’t feel? Is that what makes me feel like a poser?

I am working to steer my wardrobe and sewing practice to a place that meets somewhere in the middle. Not totally look-at-me, center stage, neon yellow lace but not boring back-of-the-closet t-shirts either. Things that can be cozy and casual and still capture the light of who I am to someone I’ve never met. And maybe being mindful of which environments I feel like I can let the guard down just a little and feel a little more of the “ah screw it, I’ll wear it anyway” energy.

Now more than ever it’s so interesting to think of our clothing and why we dress the way we do, especially as we are emerging into this new social world. I know I am STILL wearing my Hudson pants most days, and I doubt there will be many non-stretch fabrics in the winter months to come. But here’s hoping there are more opportunities created where we can all express the most sartorial parts of ourselves shamelessly, and grace for ourselves in the times when we don’t.

Photos by Dallas Curow,  a total throwback to our first shoot together in 2016 and the beginning of a beautiful friendship.

Comfortable Sewing // Hudson Pants and Odgen Camis

Posted on by

1

For the longest time I was a one-and-done seamstress. It was rare for me to make the same pattern twice, and if I did, it was in a wildly different fabric or for a specific situation. I sought out novelty and let the TNT (tried ‘n’ true) train chug right on by. It felt wasteful to have multiples of the same thing in my closet when variety was the spice of life. Why wear one thing, when you could wear ALL THE THINGS?

As time wore on, my skills improved and I settled into my style persona. I started making patterns that were quick and satisfying, but elevated my wardrobe in a major way. And repeating them. Thoughts would drift to new fabrics and colours of these basic patterns that could fill multiple spots in my wardrobe. It became apparent that if I made variations of similar building blocks, I could make outfits I knew would look good without much thought. They could be mixed and matched in endless ways, which turns out to be much less wasteful than lots of single pieces that would only work in one specific outfit. Maybe there was something to this TNT thing after all.

The first of this new wave of TNT’s was the True Bias Ogden Cami. I was wary when it first hit the scene, as I traditionally avoid v-necklines at all costs. But one New Year’s Eve I needed a quick pattern for a sequin top and the simple lines and easy PDF print made me take the plunge. And whaddya know, I found the neckline to be flattering in a way that v-necks typically aren’t on me. I really loved that sequin one, and then a few months later I needed a project to bring along to a sewing afternoon with a friend. Few pattern pieces, no fiddly notions, and could be completed in a few hours? Check, check and check. The rest, as they say, is history.

As this spring approached, I cut out three more in a variety of fabrics to suit different moods and outfits. One sophisticated solid linen, one punchy Liberty lawn and one breezy polyester polka dot print. I decided to knock them all out in tandem. Can I just ask, how come no one told me how awesome batch-sewing is? It was so satisfying to watch them all come together as a group and having 3 full new garments at the end of what felt like one project.

In order to streamline my progress, I determined that a navy thread was a common enough colour denominator between the three fabrics. I used that for the entire construction, only changing to matching threads for top-stitching and under-stitching at the end.

The only pattern changes I made were extending the length about 4 cm (which I slashed and spread right into my pattern pieces so all future ones will be this length), and I got slightly adventurous and rounded the neckline on the polka-dot one, to see if I’d like it. It works, but it takes away a bit of the “style” of the pattern I think, and makes it more basic. I’ll only do this again if I am making ones specific for layering with other things.

Now, normally I’d be pairing these new tops with jeans and a cardigan and be on my way, but as we all very well know, ain’t no one wearing jeans right now. I needed comfy pants (that aren’t literal pajamas) and stat.

I knew the ticket would be the True Bias Hudson Pants (I just realized this is a full True Bias look!). I’ve had this pattern for years in PDF form after it came bundled in the Perfect Pattern Parcel (RIP). I bought the bundle for the Julia Cardigan, but was interested in the Hudson; I just never really had the need for them until now.

I searched my stash high and low for the right fabrics, trying to not break my recent “no shopping until you complete the other things you started” rule, but right now, most of what I have on hand are woven fabrics and novelty prints (or not enough of something for pants). Blackbird Fabrics just *happened* to release a collection of bamboo and cotton stretch fleece fabric a few weeks ago and it just called to me as the comfort I’d want in a house pant.

And yes, these are going to be house pants. I could wear them out in the world (once it’s safe to do so, obvs), but if you’ll allow me a small side story…

A few years back, a few sewing bloggers talked about the Kibbe style identities. I went down the rabbit hole, and while there are some issues with the system (and fashion has no real “rules”), one part of the system really struck a chord with me and helped define something I had trouble articulating in my closet. The system recognizes 3 different ‘levels’ of dress, 1 being most casual, and 3 is most formal or “dressed up”. Different style personalities can play with the bounds of these levels more than others. For example; on some people, joggers and a tee looks stylishly casual as level 1, while myself in the same outfit feels like I look like I’m heading off to help paint the fence (level 0? Ha). I fall under soft dramatic, which tends to work better in things that are a little more streamlined and crisp, leaning a level higher than other types. I’ve always felt sloppy in very casual clothes, like cute hoodies or graphic tees, even when those items look SO GOOD on others. On the flip side, I feel like I might wear my Keilo Wrap Dress in more casual settings than the style typically suggests. This is just what resonated with me though; you sew you.

Anyways, for comforts of home, these joggers were a super fun and fast make, and especially since I also batch-sewed these. I did them up mostly on my serger and they came together in just a few sessions with very few changes. I wanted the lime green pair to be cropped at the ankle but not as short as mid-calf pattern option, and the grey pair to be full length. The pattern is drafted for a 28″ inseam, and since I have a 30″ inseam, I left the pattern as-is for the green, and added the 2″ extra to the grey. My only complaint is that I wish I took in the waistband juuust a smidge. It’s slightly too large and I have to rely on my drawstring more than I intended. I could take the elastic in, but the amount of unpicking required isn’t worth the amount it actually bothers me. It’s more a note for future versions I may embark upon.

I am super happy with these pants, as they are as comfortable as pajamas, but I feel a little more like myself putting them on in the morning. I love the contrast details with the black and grey and the bright punch of color with the green that make them extra special. I’m not embarrassed to go check the mail in these, and the soft fleece is so heckin’ cozy.

Once I finished both the pants and the camis, I wanted to finish them up extra special. Enter: some fun labels! These are from Kylie and the Machine and I got them from Blackbird Fabrics. The “this is the back” tag I find especially useful on the Odgens, since the back and front are very similar and I have gotten mixed up on more than one occasion. It’s an extra special touch that I want to put into more of my garments, especially the ones that I know I will wear a ton. It just feels a little more legit, y’know?

Now if you’ll excuse me I have to live out the rest of my Me Made May days in these comfy clothes and make more progress on my UFO (Unfinished objects) list. Happy weekend!

Comfortable Sewing // Linen Kielo Wrap Dress

Posted on by

6

When we rang in 2020, I dubbed it: The Year I Finish all the $#*t I’ve Started. I wrote a list of all the crafting projects that have been initiated to some degree, and told myself I wouldn’t purchase anything new until these were done. Whether it was a project I only acquired the materials for, one I began working on (and abandoned), or something I technically completed but needed to ‘finish’ for it to be wearable/displayable/useful, they all went on the list.

I knew it would take some time to get through this backlog of UFOs, but in the end I would end up with a clean craft slate. I hoped that it would 1) absolve the guilt I feel when I see half knit sweaters crammed in a corner and my fabric stash literally busting my furniture at the seams, and 2) help me zone into what projects I actually really enjoyed doing, and not what I felt like I “had” to do, or simply liked the idea of.

By forcing myself to complete what I started, perhaps I could diagnose what caused me to abandon them in the first place. Maybe I just like pretty, fluffy yarn instead of knitting? Or maybe I just need less distraction from faster projects to get into the stitches? Maybe I love looking at tailored garments on the internet, but only really have the time for making comfy, one-day stretch clothes. Maybe by helping Rory finish his sewing project, I could unlock the gift of self-less sewing! Really, it was going to be a craft revolution.

Then, lo, we found ourselves in the midst of some pretty unprecedented times. I was laid off my job pretty early on, and in what should have been the gift of ALL THIS FREE TIME to get crackin’ on the list… I was feeling more in the how-’bout-we-don’t territory. I guess it’s hard to feel motivated when the world comes to a screeching halt.

(The fact that Animal Crossing came out at the end of March had NOTHING to do with it…)

Then, we have the practical side of things. Getting dressed each morning knowing full well that you aren’t going anywhere presents a bit of a problem. Yes, putting on normal people clothes like its a normal day is supposed to be good for your sense of routine, but if I’m mostly gonna be curled up on the couch reading books, playing games or crafting, I wanna be comfy. No jeans or frilly dresses happening here, folks. And after a week of the same pair of yoga pants pulled from the floor each day, I realized my lack of options in the “comfy but not painting clothes” milieu. Think pajamas, but presentable (to whom, I am not sure, but roll with it).

Plus, as the snow melted and the sunshine came through, I needed some warm weather options as well. Y’know, for all those picnics with myself.

Hmm, better look at that list… hey! A Kielo wrap dress! This pattern from Named is one that caught my eye long ago. I was always intrigued by it, but worried it was too weird? Would the flying squirrel wraps work in daily life? Then I remembered to take my own dang advice and embrace what I find attractive in clothing and just run with it. I purchased the pattern last spring, with plans for a breezy summer make, but never got around to it while it was still warm.

The fabric is a viscose linen slub I bought from Blackbird Fabrics. The wonderfully cheerful chartreuse tone is what did me in. I actually bought this in person, during a jeans making workshop with Lauren I attended in Vancouver last April. It feels like a million years ago that something like that was even possible. (I did make some jeans, and they are awesome, but I have another pair cut out with some tweaks and I want to compare before blogging ’em. And yes they may have been cut for a year. Yes, that’s on the list!)

The sewing of this dress comes along actually fairly quickly. The biggest thing is having the space for all that fabric to be cut and pressed. Thank goodness for the floor.

I found the Named instructions/diagrams to be a little sparse, so I recommend reading them over twice before going in, but there’s nothing in the actual construction that a beginner couldn’t handle.

The only change I made was in drafting an all-in-one facing for the neck and arms, as I didn’t want top-stitching along the neckline. Also, I waaayy prefer facing finishes… bias tape and I don’t get along on curves. The tutorial on the Named blog was super useful and I just burrito-ed away. I did tack the facing down at the underarm seam to keep them flipping out, and also re-enforced the seam there with a few extra stitches.

In terms of cool, but comfy clothes to loft around in, I’d say mission accomplished. It feels like a chic, modern house dress. Now as the sun shines I can swan around my apartment wrapped in a big linen hug. Ah hugs… those were the days (how long do we need to keep acknowledging the *thing* in all our writing, btw?).

There’s something simplistic, yet complex about the shape that just takes it from being just any other maxi dress. I also enjoy the versatility of wearing it with the ties wrapped either way, but I much prefer the drama of the cocoon front. While the linen screams summer, I cannot WAIT to wear this in the fall, layered with a dark turtleneck for super cozy vibes.

Will I get more of my “list” done this summer? Only time will tell. Now that I’ve accepted the new normal, I feel my creative juices creeping back in. I have a few more comfy house clothes that unceremoniously jumped the line with a fast pass out of necessity, but I think this is a good motivation to keep moving forward and keep the days from feeling repetitive. Hope you are all doing alright out there, and can enjoy the sunshine.

Linen in the Sun // V1507

Posted on by

2

As I mentioned in my previous post, I was lucky enough to visit sunny Palm Springs earlier this spring. In packing and preparing for the trip, I made a discovery. I had so many options I wanted to bring! I LOVE my summer wardrobe. It was also here I realized the items that I loved the most were garments I had made. I looked to my left at the winter wardrobe I was leaving behind, and to my right all my summery options I was packing and realized; my me-made wardrobe…is a summer wardrobe. My cold-weather closet has few hand-made garments in it, and even fewer that I would say I loved. This is unfortunate because our hot, summer season is so short. That fact is made doubly-unfortunate when you consider my summer wardrobe now includes this:

This is a floaty, frilly, pastel blue linen, Rachel Comey design from Vogue patterns in all it’s sunshine-y, ruffly majesty. When I was buying V1501, this pattern also caught my eye. It had a saucy amount of flounce and the sort of exaggerated shape I have recently been craving. After a quick search on the sewing blogs and seeing this version, I was completely sold (and destined to make it in light blue linen).

Once again falling into size 12-ish, I decided to read some reviews before cutting. Many recommended to size down due to the wide back opening, so I opted to cut out a size 10. It feels like a good fit and I am glad I sized down. Just a note if you are making this pattern- make sure you double check your sizing on the pattern pieces. I noticed in mine the piece for the back yoke (number 4) was labeled in the range 6-14 instead of 4-12 but the sizing was the same (so I cut a size 12 in this piece which was really supposed to be the 10).

For adjustments,  I didn’t want things to feel too short since I always need to add length, but this pattern looks straight up weird when you look at the pieces and I feared messing with proportions too much.  I added just 1.5cm length to the entire bottom hem on both front layers, and I think it was a good amount. As for cutting the pattern out, I was able to save some space by eliminating the centre front seam on the bottom layer and cut on the fold.

In putting everything together, it was surprisingly straightforward and not as fiddly as the strange pattern pieces might lead you to believe. I did make a few small changes though. I skipped bias binding the seam on the inner yoke and just overlocked it instead, and did the same when I attached my sleeves. I understand that these could give your project a clean, elevated finish, but I fight with bias tape on simple hems and simply didn’t feel the need to wrangle it into an armhole. I also was confused by some of the sleeve notches and where the edges were supposed to overlap so I eyeballed it, and confirmed by measuring the pieces against each other.

Other than that, just be prepared for so. many. tiny. hems. Recently with many projects, I have gotten into lazy habit of just overlocking hems and just folding it up to finish. Don’t like fussing with pressing, meticulous measuring and doubling over and the invariably wobbly, stretched out or puckered hem that can result. This pattern would not let that fly, as it would be super visible. I spent probably as much time pressing and folding these edges as I did actually sewing. Surprisingly though, it felt therapeutic and it came out so beautifully. I might have to start doing things properly again.

At the end of it all I was worried that things would be just too floofy. It seemed dicey when I first put it on but after I got Rory to help me properly tie the back, which pulled in some of the volume, I fell in love with the look. After sewing, some of the hems got a little over-stretched so I tossed it in the wash to shrink ’em back up. This inevitably lead me to crease-town. I tried giving it a good press, but once this baby is assembled, it’s pretty tricky to iron everything crisply flat. But this is the linen life. We just go find a hammock and let the cares about wrinkles float away.

This top is the epitome of summer dressing. It is light, it is fun, it has so much personality. I highly recommend playing around and giving it a sew.

Palm Springs was the perfect place to make its debut, what with the blissful heat and colorful atmosphere, but I am already counting down to some nice toasty days here at home to bust it out in it’s cool linen glory.

It’s me-made season. That winter wardrobe can wait.